Perfecto Products Archives - Specialty Tools for the Serious Plumber

Right Angle Pipe Wrench

The Perfecto Right Angle Pipe Wrench is the best tool for the worst jobs. Just because the plumbing is in a tight space, doesn’t mean you have to crawl in after it. Let the Right Angle Pipe Wrench do the crawling for you. The 14″ Pipe Wrench Head will open up enough to fit a 2″ standard pipe.

Set the wrench head on the pipe or stubborn nut and make sure the grip is tight. Then insert the extension piece into the socket on the wrench head. With the T-handle on the other end of the extension, you are ready to twist away without having to worry about bruised or scraped knuckles. You can plug the T-handle straight onto the wrench head for other situations, or hold the wrench head in your hand to easily tighten slip nuts without the wrench handle getting in your way.

Four standard kits are offered. The major difference between them is the type of T-Handle & Extension included.

Essentials Kit – (1700-DE) The Essentials Kit includes a 28″ extension, 19″ Forged Steel Sliding T-Handle and 14″ Wrench Head.

Deluxe Kit (1700-D) (shown above) – The Deluxe Kit includes 19″ Forged Steel Sliding T-Handle, 28″ Extension, 14″ Wrench Head, Water Meter Key Head with 7/8″ slot and Crush Proof 1-1/2″ Pipe Plug.

Deluxe Kit with Clean Out Plug Wrenches (1700-DWP) (shown below) – Includes everything in the Deluxe Kit and adds our 10 piece Clean Out Plug Wrench set. Two of our most popular tool kits together in a single box, saving valuable space in your truck and increasing your flexibility on service calls.

Use the Right Angle Pipe Wrench with the Adjustable Jack Stand for better leverage and stability.

The Perfecto Right Angle Pipe Wrench – “Access Plus Leverage.”

Individual Replacement Parts and other 3/4″ Square Socket Tools are also available.

Right Angle Wrench Replacement Parts

Floor Drain Wrench

The Floor Drain Wrench is a must when the inner ring of the floor drain is jammed tight. Forget screwdrivers, chisels or pry bars. Forget wasting time trying to figure out what tool to use.

Precisely flame cut from 3/8″ steel plate to fit exactly into the grooves in the inner ring.

Part Number and Description:

Faucet Nut Saw

Grind through faucet nuts in seconds with Perfecto’s Faucet Nut Saw. Sturdy welded steel construction with Carbide Saw. 3/8″ hex shank fits most portable drills. No plastic parts to break or lose. Wear safety glasses!

Part Number and Description:

7000-NS – Faucet Nut Saw with 3/8″ Hex Shank

Speed Type Tailpiece Flanging Tool

The Speed Type Tailpiece Flanging Tool easily rolls flanges on to scrap tubing. Alloy steel construction easily handles 17 to 20 gauge tubing.

Part Numbers and Descriptions:

7000-A964-2 – Flanging Tool for 1-1/2″ Tubing
7000-A964-4 – Flanging Tool for 1-1/4″ Tubing

Operating instructions for the Flanging Tool are also available (Adobe pdf format).

Outside Easy Out

Perfecto’s Outside Easy Out offers another way to remove stubborn pipe nipples when an ordinary wrench won’t fit. Simply tighten the bolts around the nipple and turn the Easy Out with a Meter Key.

Part Number and Description:

7000-EO – Perfecto Outside Easy-Out

Emergency Gas Shut Off Wrench

In an emergency, such as an earthquake, don’t fumble in the dark looking for a wrench when you suspect there’s a gas leak in the house. Keep this simple and durable tool at the gas meter so it’s there when you need it.

Part Number and Description:

7000-EW – Emergency Gas Shut-Off Wrench with 1/2″ slotted head to fit household gas meters and 10″ handle for leverage

Hydrodrill Spare Parts

Hydro Drill

HOW THE HYDRODRILL WORKS:
The Chuck Adaptor is inserted into the chuck of your drill. The Chuck Adaptor, the Shaft and the Male Pipe Fitting are all solidly attached together, and rotate with the drill. The Shaft Bearings allow the Shaft to turn freely. A hose is attached to the Hose Fitting. When the water is turned on and the valve is opened, water runs through the valve and into the Hydrodrill body. The Shaft Seals keep the water from leaking out. There is a hole in the side of the Shaft, and another hole that runs down the length of the Shaft out the end. The water enters the side hole and runs out the end. From there it fills the pipe attached to the Male Pipe Fitting, and from there out through the Hydrodrill Auger.

Cores under sidewalks, driveways, existing landscaping. Eliminates the need for excavation.
Sturdy aluminum housing, ductile iron auger, high-strength steel chuck adaptor.

Part Numbers:
1502 #1 Hydrodrill with 1/2” Chuck, 2” Auger

Complete Listing of 3/4″ socket tools

Many of the tools Perfecto manufactures use an interchangeable 3/4″ Square Socket. Below is a listing of all of them. Most parts from the sets below are available individually. The 3/4″ Ratchet Wrench (1701-RAT ) is shown for reference.